According to the analysis and Suggestions of your company’s materials and our company (guangzhou iHeir antifungal technology co., LTD.), the following methods can be used to effectively prevent mildew of textile fiber seat cushions:
Mildew prevention solution
According to your company to send the sample to our company, our company use mouldproof tester tests, found that the material humidity below 7%, mold risk is relatively low, considering the expensive department store due to production after 2-3 months by sea exports, mainly mouldproof link should be in the process of packaging, storage and transportation, therefore, suggest that the expensive department according to the following method is mouldproof processing, ensure the security of the textile fiber seat pad hand delivered to your customers.
Our company suggests two methods: we should control the humidity of packaging materials before packaging, so as to avoid problems such as deformation of box and product caused by high humidity (you can ask your packaging material supplier to control).
Method A: placed in the packing box of 6 x8cm Dc. Odorban stickers mouldproof piece 1 piece (the dosage according to your company send samples to our specification) is given and then sealed packaging, can effectively maintain storage transport does not occur in the process of mould (note: after the seal if open the need to replace new mouldproof patch again, valid mouldproof cycle 6 months)
Method B: direct the iHeir – Spray mildew antibacterial coating, the surface needs to be sprayed (using the airbrush or plastic watering can Spray, special attention to the stitching should increase the dose of spraying, due to the common product mould is uneven places began to grow, can effectively maintain at least 280 days, even in the humid environment or itself humidity are not moldy) after spraying in the natural environment to dry for 15 to 30 minutes before packing.
When storing the products in the warehouse, especially in the rainy season, a double probe temperature and humidity meter should be installed to record the indoor and outdoor temperature and humidity at any time. When the indoor temperature is higher than the outdoor humidity, the doors and Windows of the warehouse must be opened; otherwise, the doors and Windows of the warehouse must be closed to keep the warehouse clean. When storing the products, the pallet should be placed at the bottom with a distance of at least 15cm from the wall.
Transport of 3.
During transportation, check whether there is water seepage in the carriage (spray water in a basin on the top of the container to test whether there is any leak in the container). If there is, take measures to plug up the leakage to clean the container and avoid cross-infection. Before loading, hang a container drying rod in the container. (4 for 20-foot containers and 8 for 40-foot containers) function: adsorption container rain formed by the change of temperature difference between day and night in sea transportation.
Processing according to the above method can effectively prevent the seat cushion of your company from mildew during storage and transportation.
Moldy box handling
Were moldy seat pad should be first to use brush or cloth with iHeir – Clean the mould cleaner to Clean the mould, the sterilization, the natural environment after drying Spray again mildew antibacterial iHeir – Spray drying after packaging, packaging humidity need drying processing will be down to less than 12% humidity, if according to the seat cushion packaging has generated mildew mold processing method.
Note: although the mildew proof antibacterial agent of our company belongs to environmental protection products, it is recommended that people with sensitive skin should wear rubber gloves and face mask for operation.