According to the mold proof engineer of our company to visit your company on the spot, according to the furniture material structure processing technology of your company, combining with the effect of the mold proof products of ehaoer series, it is suggested to follow the following process, which can effectively prevent the furniture from moisture and mildew and ensure the safe delivery of your products to domestic and foreign customers.
I. material control
Textile fabrics and leather should be kept clean and hygienic, especially the leather with heavy oil should be treated with anti-mildew. The operation method is to directly spread iHeir-QF antibacterial cream on the textile fabric and leather to make the antibacterial agents permeate the surface of the textile fabric and leather to prevent and inhibit the bacterial growth.
Glue, especially environmental glue, it is necessary to add 1~2% special anti-mold antibiotic iHeir-JS into the glue before use, so as not to provide nutrient source for bacteria and cause microbial reproduction.
In density board, MDF, wood should be controlled humidity, suggest to control the wood humidity below 12%, more than 14% humidity should be treated mouldproof, simple way is to brush with wool on the gallows on a layer of bamboo mildew antibacterial iHeir – PT, if there is do the paint wood surface, suggest that there is 1-2% of the paint to add iHeir – YQ paint special mildew antibacterial agent (environmental reasons, and now the paint does not add any antiseptic sterilization agent), to suppress the growth of mold, bacteria and other microorganisms.
In each surface finished product placed Dc. Odorban mouldproof, paper, plastic bags, packaging products should keep clean and tidy, suggest to control the humidity below 12%, when packing paper, plastic bags as far as possible to all packaging to furniture products, make its relatively closed, Dc) odorban mouldproof posted by release antibacterial factor in airtight space kill bacteria and inhibit the growth of bacteria, mildew antibacterial effect. Note: the quantity of the dc.odorban will be increased or decreased according to the size of the product.
H-10 mildew proof drying bag is placed inside the packaging bag of finished furniture to reduce the risk of dampness and mildew.
Ii. Warehouse control
Fabrics, packing materials and finished products should not be directly piled on the floor, but should be separated by pallets and 10CM away from the wall >.
Fabrics, packaging material, finished goods warehouse should be conducted once a month the sterilization treatment, in combination with the practical situation of your company, first of all, keep the floor clean sanitation, fabrics, packaging materials and finished products warehouse to start the first three months of once a month, three months after once every three months for sterilization processing, use iHeir – Spray mouldproof antibacterial agent added to 5% to drag the water sweep the floor once (note: the plum rains season should be once a month).
Due to the attention to ventilation, when the outdoor humidity is greater than the indoor humidity, close the doors and Windows, on the contrary, open the doors and Windows, record the humidity, temperature changes, if the humidity season indoor relative humidity 80%. Dehumidification equipment or special sterilization package for warehouse should be installed to reduce the risk of dampness and mildew.
Combined container control
Check whether the ventilation and sealing facilities are intact, whether the leakage deformation.
Containers should be clean, free from grease and odour to avoid cross-contamination. It is recommended to Spray iHeir-Spray (500g/ Spray per container) in the container.
After loading, in order to avoid moisture caused by Marine transportation climate change (” container rain “), it is recommended to hang container mildew proof rods on the inner wall of the container at intervals of 2-3m/bar.
Already mildewed article, through processing also can make sure not to be mildewed!
Note: it is recommended to train professionals to be responsible for mold control, so that mold control measures can be fully and effectively implemented.
If there are any other questions, we can provide technical support and professional guidance, or we can send someone to the site.