According to the mold proof engineer of our company to your company on the spot for inspection, according to your company handicraft material structure processing technology, combined with the effect of aihaoer series mold proof products, it is suggested to follow the following process, which can effectively prevent the problem of damp and mold of handicrafts, and ensure the safety of your products delivered to the hands of guests at home and abroad.
I. material control
1, bamboo woven products and wood, rattan, awn, kui, grass, etc. With iHeir-JP bamboo and wood anti-mildew antimicrobial potion impregnation should make bamboo, wood, rattan, grass and its products after impregnation weight increased by 15%-20% (about 5-10 minutes). Note: the soaking liquid is prepared according to 1:20 (5kg bamboo and wood mildew inhibitor: 100kg water). Bamboo, wood, rattan, grass and their products are all immersed in the prepared potion (do not appear above the water), to achieve a weight increase of 15%-20%, take out the drop dry potion, air-dried or sun-dried after packaging and warehousing. The potion prepared by this product is stable in nature, and can be used repeatedly without having to be discarded. However, the solution should be added in time when the bamboo and wood products cannot be immersed in the solution, and the added solution should be prepared in a higher proportion.
2. Glue, especially environmental glue, must be added with 1~2% special anti-mold antibiotic iHeir-JS in the glue before use, so as to avoid providing nutrient source for bacteria and causing microbial reproduction.
3, density board, MDF, wood should be controlled humidity, suggest to control the wood humidity below 12%, more than 14% humidity should be treated mouldproof, simple way is to brush with wool on the gallows on a layer of bamboo mildew antibacterial iHeir – PT, if there is do the paint wood surface, suggest that there is 1-2% of the paint to add iHeir – YQ paint special mildew antibacterial agent (environmental reasons, now the paint does not add any antiseptic sterilization agent), to suppress the growth of mold, bacteria and other microorganisms.
4, placed in the finished product each surface Dc. Odorban mouldproof, paper, plastic bags, packaging products should keep clean and tidy, suggest to control the humidity below 12%, when packing paper, plastic bags as far as possible all packaging to craft products, make its relatively closed, Dc, odorban mouldproof posted by release antibacterial factor in airtight space kill bacteria and inhibit the growth of bacteria, mildew antibacterial effect. Note: the quantity of the dc.odorban will be increased or decreased according to the size of the product.
5. Put h-10 mildew-proof drying bag inside the packaging bag of finished handicrafts to reduce the risk of dampness and mildew.
Ii. Warehouse control
Bamboo products and wood, rattan, awn, sunflower, grass and other finished products should not be directly stacked on the floor, should be separated by pallets, and from the wall > 10CM.
Material warehouse and finished products warehouse should be conducted once a month the sterilization treatment, in combination with the practical situation of your company, first of all, keep the floor clean sanitation, fabrics, packaging materials and finished products warehouse to start the first three months of once a month, three months after once every three months for sterilization processing, used to drag iHeir – Spray fungicide 5% added to the water sweep the floor once (note: the plum rains season should be once a month).
Pay attention to ventilation in the material warehouse and finished product warehouse. When the outdoor humidity is greater than the indoor humidity, close the doors and Windows; otherwise, open the doors and Windows and record the changes of humidity and temperature. If the indoor relative humidity is 80% in the wet season, open the doors and Windows. Dehumidification equipment or special sterilization package for warehouse should be installed to reduce the risk of dampness and mildew.
Combined container control
Check whether the ventilation and sealing facilities are intact, whether the leakage deformation.
Containers should be clean, free from grease and odour to avoid cross-contamination. It is recommended to Spray iHeir-Spray (500g/ Spray per container) in the container.
After loading, in order to avoid moisture caused by Marine transportation climate change (” container rain “), it is recommended to hang container mildew proof rods on the inner wall of the container at intervals of 2-3m/bar.
If there are any other questions, we can provide technical support and professional guidance, or we can send someone to the site.