【Appearance and colour】colourless and transparent
【Majoy usage】iHeir – BJ (Textile Anti-mold Agent)can be widely used in textile such as cotton, nylon, polyester and other processing of fiber products. Recently ,there is a widely usage in nonwoven fabric, foam polyurethane material.
iHeir-BJ (Textile Anti-mold Agent) is a kind of high efficiency, safety anti-moid agent . It can kill all kinds of bacterias and fungi in a very short time .So,the broad spectrum is very large.Through special textile and fiber affinity labeling technique to promote effective ingredients distribute evenly on the surface.iHeir – BJ can destroy bacteria cell walls (intrinsic permeability is extrinsic permeability of 20-30 times) that make cell membrane rupture, the cytoplasm leaking .In the end ,the microbial-metabolism was over.It is very environmental, so no stimulation to the skin.No harmful material such as formaldehyde and heavy metal ions .because iHeir-BJ is comply with the requirement of environmental protection.
Our textile antibacterial iHeir-BJ can be used for cotton, nylon, polyester and other fiber products processing. The usage very large. Recently we has sold iHeir-BJ in nonwoven fabric, foam polyurethane, synthetic leather and other materials.
Dyed yarn batch production：Usage of bobbin yarn is 2%~3%(o.w.f.)
Usage of skein dyeing is 3%~5%(o.w.f.),bath ratio is1:10~1：20
pH5~7（weak acid or neutral）
iHeir – BJ （Textile Anti-mold Agent） can diluted in water easily. Stiring in the water at the same time, adding iHeir – BJ would modulate dilute solutions. iHeir-BJ dilute concentration adjusted by processing of raw materials, processing methods and products use.
Processing fiber can use general dyeing machine, such as Obermaier dyeing machine,skein dyeing machine,bobbin dyeing machine,they all can handing yarn.When handing fiber that should choose rope dyeing machine or dip dyeing machhine,but handing ware that should choose perforated cylinder dyeing machine. Washing fully, dewatering after dyeing process,then joining iHeir-BJ before drying process.
In processing of iHeir-BJ,the important thing is treating surface.So,please wash clean enough,espacially the material who is easy to fall,like redundant dyes, detergents and other contaminants, and so on .It must wash clean with water or hot water.There is not durability that processing polluted fiber,because iHeir-JB will fall off together with contaminants at once time.However,after processing of iHeri-JB,the processed products dry under 80-120℃ that will form a film covering on its surface.The film covering was not hot hardening but for drying ,that is said dry the wet processed products directly .Even at room temperature to dry, its antibacterial properties is the same as baking.
If need to soft,handle, water uptake,anti-electrostatics,anti-soiling finish that must considering the ionicity of processing agent.If the processing agent is cationic or nonionic,it is better to one-bath two-step process or two-bath process which will increase the efficiency.
but remamber don’t water-curing together.Above all occasions ,iHeir – BJ（Textile Anti-mold Agent）should be process first.
iHeir – BJ(Textile Anti-mold Agent) in 25 kg square plastic drum in blue packaging, please put the product in a cool, dry place where under a normal temperature.In addition,keep away from children . Don’t touch the mouth, nose, eyes, etc.If access to the eyes or nose and mouth, rinse immediately with plenty of water, please.
Notice: This product belongs to the environmental product, but does not exclude individuals will appear allergic phenomenon, so it is recommended that user use rubber gloves and masks when operating.If the skin contact with the agent immodestly, please use soap- water to clean.If the product drop in eyes, please use a lot of water wash immediately.If the condition were more severe , we suggest that see a doctor immediately.
If necessary, we can provide free technical support and on-site guidance!
From Monday to Saturday 8:30-12:00 13:30-18:00
Some holidays have arrange staff on duty.