Directions for Use：
1.Remove the swab from the tube.
2.Swab the test surface. Be sure to collect enough sample material by covering an area of at least 16 square inches.(4inches horizontal and vertical).
3.Insert the swab back into the tube, firmly press down on the handle until the swab snaps into the solution chamber. Shake rapidly for at least 5 seconds. Wait up to 10 minutes for results.
IF IT’S.GREEN IT’S CLEAN!
Because this test looks for the presence of specific proteins and carbohydrates it is subject to false negative and positive results. Certain substances such as food, blood and untreated wood may yield a false positive result. Eventually the solution will turn purple(usually between 1 hour and 24 hours).
Instant mold test principle：
In the unlikely event of contact with test reagents please note the following: In case of contact with eyes, immediately flush eyes with plenty of water for at least 15 min . In case of contact with skin, flush immediately with plenty of water. If case of contact with skin,flush immediately with plenty of water . If irritation persists get medical attention. If swallowed, wash out mouth with water and seek medical advice.
Leave a Comment